Is LUBA mini AWD firmware 1.15.21.1 safe? — Too early to say
Only 4 owners have reported on this build so far — not enough for a score. What we do know: 3 of the 4 reports describe problems.
1 normal and 3 glitchy across 4 reports. A score appears at 10 weighted reports; this build has 4.
What owners report on this build
Reported by one owner each
- Battery draining too fast — 1 owner
- Blade or cutting-deck problems — 1 owner
- Phantom obstacles (stops for things that aren't there) — 1 owner
What owners say this build fixed
Reported by one owner each
- Connection drops (app can't reach the mower) — 1 owner
The 4 reports, in full
“Auch mit dieser Firmware bleibt mein LUBA mini 800 AWD weiter eingeschaltet, wenn die LS stromlos wird. Ergebnis wie bisher: Entladung von 100 % auf 84% in ca. 1,5 h. => Roboter weiterhin händisch ausschalten notwendig”
With this firmware too my LUBA mini 800 AWD stays switched on when the charging station loses power. Result as before: discharge from 100% to 84% in about 1.5 h. => still necessary to switch the robot off by hand
“nach einiger Abstimmung mit dem Support und Tests. Kann ich sagen das nach dem Update von allem auf die aktuell neuste Version für Android 2.3.8.19 und Luba Mini 800 1.15.21.1 alles wieder geht seit gestern Abend. Der Support hat mir mitgeteilt das APP und Luba Firmware nicht mehr Kompatible sind wenn man nicht die Versionen passend aus Mai nutzt.”
after some coordination with support and testing. I can say that after updating everything to the currently newest version for Android 2.3.8.19 and Luba Mini 800 1.15.21.1, everything works again as of yesterday evening. Support told me that APP and Luba firmware are no longer compatible if you do not use the matching versions from May.
“habs gestern mit etwas Zähne knirschen gemacht. Also bei mir mäht er auch danach immernoch ziemlich ordentlich. Einen großen Unterschied kann ich nicht feststellen. Er hat wie auch davor zur Garage zurückgefunden und bis jetzt auch noch nichts Verrücktes angestellt. Die Sache mit dem komplett runter gefahrenen Mähteller beim Start des Ladevorgangs ist aber leider unverändert geblieben.”
did it yesterday with a bit of teeth-gritting. So it still mows pretty decently for me afterwards too. I can't detect any big difference. Just like before it found its way back to the garage and so far hasn't done anything crazy. Unfortunately the business with the blade deck fully lowered at the start of charging has remained unchanged.
“habe die FW 1.15.21.1 installiert und mal ein kleinen Bereich gemäht. Er macht immer noch seltsame Ausweichmanöver bei Hindernissen, aber das Stück hat er zumindest jetzt mit Hindernisserkennung auf Standard gemäht. Da musste ich das mit der letzten FW immer deaktivieren, sonst ging nichts. Aber so richtig rund läuft das wohl immer noch nicht.”
installed FW 1.15.21.1 and mowed a small zone. It still makes strange avoidance manoeuvres around obstacles, but at least it mowed that patch with obstacle detection on standard this time. With the last FW I always had to disable it, otherwise nothing worked. But it still doesn't really run smoothly.
That's everything we have — and the reports are mixed. We'd rather show you 4 real reports than a made-up percentage; if you're on this build, yours is the report that moves it.
Do I need to update the app too? →How does 1.15.21.1 behave on other models? →